eltafans.com legal

Humidity Sensor

A wall mounted sensor for measuring relative humidity when used in conjunction with a humidistat. High level of reliability with set point settings that can be locked (0 to 90% RH). The sensor has an accuracy of + / - 2% RH (between 40 – 60% RH) and +/- 3% RH in all other ranges. The enclosure has a protection classification of IP30.
Dimensions (mm): 100(H) x 85(W) x 30(D)
More Info

Pressure Sensor

Is available for measuring gases (except ammonia). The measuring element is made from a ceramic material to provide good stability and accuracy in measurement. Suitable for use in ambient temperature of -15 to +80°C and has a protection classification of IP54 and suitable for wall mounting. There are two working range options, a standard option suitable for 0 – 300 Pa with an option for a working range product of 0 – 500Pa.
Dimensions (mm): 85(H) x 100(W) x 50(D)
More Info

Temperature Sensor

Suitable for wall mounting this sensor has a range of temperature sensing of 0 to 50°C. The level of accuracy provided is +/- 0.3°C. with a protection classification for the wall mounted enclosure of IP65.
Dimensions (mm): 100(H) x 85(W) x 30(D)
More Info

PIR Sensor

This sensor will detect when a person enters a space. This detector has a pulse-detecting function that minimises the risk of false alarm and has a settable output on / off delay and protection classification of IP40. Working area of 15 metre x 15 metres, 110° angle can be used and the sensor is suitable for wall or ceiling mounting.
Dimensions (mm): 112(H) x 66(W) x 43(D)
More Info

CO2 Sensor

This transmitter incorporates the latest auto calibration processing. Within the same casing we have the option to combine the measurement of CO2 and temperature. The transmitter has the ability to measure concentrations of CO2 from 0 to 2000 ppm or any set range in between to suit the legislative requirements. If it also used to measure temperature, a range of 0 to 50°C is available. The sensor has a protection classification of IP30.
Dimensions (mm): 100(H) x 85(W) x 30(D)
More Info

Room Controller

The room controller is a programmable unit complete with a back lit LCD display that is the interface between the sensor and the DCV hub on the fan unit. This unit is programmed to indicate whatever sensing details are required (dependant on the type of sensor used). It is suitable for use within a temperature range of -20°C and +70°C and has a protection classification to IP20. Power consumption of 30VA for DCV zone controller. The RC is interfaced with the DCV zone controller mounted on the fan unit itself which is pre-loaded with the design and operational information for that particular fan unit. A 3 metre long SELV cable is provided as standard. The DCV zone controller has a protection classification of IP20 and is enclosed in a control module on the fan. The interface is capable of operating at temperatures between -40°C and + 50°C and an RH ambient humidity of maximum 95% RH.
Dimensions (mm): 95(H) x 95(W) x 28(D)
More Info


Single Phase Output

The Eltadrive Single Phase is a fully digital, fully packaged variable speed drive for controlling low power single phase motors.

Designed to be cost effective and easy to use, the Eltadrive Single Phase is for use with Permanent Split Capacitor motors (Cap run) or Shaded Pole Single Phase induction motors.

Eltadrive Single Phase has only 14 standard parameters to adjust in its basic form for quick and easy drive commissioning. For the more advanced user the extended parameter set gives access to powerful additional functionality.
More Info


1PH/3PH - 3PH/3PH Output

  • P55 Washdown Duty three phase
  • Models suitable for 200-240V 1Ph or 380-480V 3Ph input voltage
  • 4 sizes 1ph input from 0.37kW to 2.2kW
  • 6 sizes 3ph input from 0.75kW to 7.5kW
  • Suitable for operating temperatures of up to 40°C
  • Keypad or Terminal Control
  • Integral RFI filter
  • Modbus RTU serial communications
  • Indication of motor current and r/min
  • Motor and Drive Protection
  • Trip Log
More Info


Smartstart

SmartStart enables a new Inverter to be downloaded with all the required parameters from another similarly programmed drive, a customer who has multiple drives of the same size can program one then copy the parameters to all the other drives; piece of mind can be given to customers unsure of how to set up an Inverter guaranteeing correct set up.
More Info
Link to Elta Group's Website More Elta Group sites